Job Archives

Machine Operator
USA - Sidney, NE
Posted 2 months ago

Operate Roto Mold machine that will produce quality products as per customer specifications. Reports to Supervisor.

  • Weigh pails of powder as per product specifications ie weight, color
  • Ensure all supplies are available at machine prior to shift i.e. vent tubes etc
  • Prepare molds - clean vent tubes, parting lines and replace breather material prior to the start of every cycle
  • Check product quality for any defects and report quality issues to Lead Hand and/or Supervisor
  • Read and understand procedures to produce products
  • Use crane to open mold to extract product when cycle is complete
  • Respond to trimmer findings and troubleshoot quality issues
  • Meet machine cycle time targets and keep machine operating efficiently in cycle
  • Handle molds with necessary care to ensure longevity of tools
  • Keep clamps adjusted to ensure mold closes properly with no leaks
  • Assist with mold changes as required
  • Record number of products completed per shift on Daily Productivity Sheets
  • Maintain a clean work station
  • Ensure wearing PPE at all times
  • Perform other duties a required
Knowledge and Experience:
  • Experience using hand tools, air tools and electrical tools
  • Familiar with a manufacturing setting
  • Mechanical knowledge is an asset
  • Quality control techniques is an asset
Skills and Abilities:
  • Perform repetitive movements
  • Stand, bend, for long periods of time
  • Lift between 15 – 60 lbs.
  • Ability to work independently or as part of a team
  • Self motivated
  • Problem solve
  • Punctual
Work Environment:
  • Plant setting
  • Fast pace

Hourly Rate: TBD •  Health, Dental, Vision and 401k benefits upon completion of 3 months probationary period.

 Shifts: Days 7:00am-3:00pm / Afternoons 3:00pm-11:00pm / Nights 11:00pm-7:00am.


Job Features

1234

1234

Job Industry

Plastic Rotomolding

Job Category

Manufacturing

Job Level

Entry Level

Operate Roto Mold machine that will produce quality products as per customer specifications. Reports to Supervisor. Weigh pails of powder as per product specifications ie weight, color Ensure all supp...

Trimmer
USA - Sidney, NE
Posted 2 months ago

Trim all products as per customer specifications and prepare product for shipping. All work is done at production machines. Reports to Supervisor/Lead Hand/Plant Manager. WHMIS training an asset.

  • Check product quality for any defects and report quality issues to Lead Hand and/or Supervisor
  • Notify Machine Operator of any product flaws
  • Read and understand procedures to trim products
  • Ensure wearing PPE at all times
  • Trim product with hand tools for excess flash
  • Drill holes to insert various parts (ie. screen, valves, wires etc.) to complete product assembly
  • Sand product to ensure smooth finish
  • Flame product as required
  • Polish product and check for imperfections
  • Stack product on skids
  • Shrink wrap skids and transport skid to warehouse
  • Weigh pails of powder as per product specifications
  • Deliver pails of powder to Machine Operator
  • Take scrap products to grinding area
  • Record number of products completed per shift on Daily Productivity Sheets
  • Maintain a clean work station
Knowledge and Experience:
  • Experience using hand tools, air tools and electrical tools
  • Familiar with a manufacturing setting
  • Ensure all work activities are conducted in a safe and efficient manner in compliance with Company PPE standards
Skills and Abilities:
  • Perform repetitive movements
  • Stand, bend, lift for long periods of time
  • Self motivated
  • Ability to work independently or as part of a team
  • Problem solving
  • Punctual
Work Environment:
  • Plant setting
  • Fast pace

Hourly Rate: TBD •  Health, Dental, Vision and 401k benefits upon completion of 3 months probationary period.

 Shifts: Days 7:00am-3:00pm / Afternoons 3:00pm-11:00pm / Nights 11:00pm-7:00am.


Job Features

Job ID

1234

Job Industry

Plastic Rotomolding

Job Category

Manufacturing

Job Level

Entry Level

Trim all products as per customer specifications and prepare product for shipping. All work is done at production machines. Reports to Supervisor/Lead Hand/Plant Manager. WHMIS training an asset. Chec...

Trimmer
CANADA - Grassie, ON
Posted 1 year ago

Trim all products as per customer specifications and prepare product for shipping. All work is done at production machines. Reports to Supervisor/Lead Hand/Plant Manager. WHMIS training an asset.

  • Check product quality for any defects and report quality issues to Lead Hand and/or Supervisor
  • Notify Machine Operator of any product flaws
  • Read and understand procedures to trim products
  • Ensure wearing PPE at all times
  • Trim product with hand tools for excess flash
  • Drill holes to insert various parts (ie. screen, valves, wires etc.) to complete product assembly
  • Sand product to ensure smooth finish
  • Flame product as required
  • Polish product and check for imperfections
  • Stack product on skids
  • Shrink wrap skids and transport skid to warehouse
  • Weigh pails of powder as per product specifications
  • Deliver pails of powder to Machine Operator
  • Take scrap products to grinding area
  • Record number of products completed per shift on Daily Productivity Sheets
  • Maintain a clean work station
Knowledge and Experience:
  • Experience using hand tools, air tools and electrical tools
  • Familiar with a manufacturing setting
  • Ensure all work activities are conducted in a safe and efficient manner in compliance with Company PPE standards
Skills and Abilities:
  • Perform repetitive movements
  • Stand, bend, lift for long periods of time
  • Self motivated
  • Ability to work independently or as part of a team
  • Problem solving
  • Punctual
Work Environment:
  • Plant setting
  • Fast pace

Hourly Rate: TBD •  Health, Dental, Vision upon completion of 3 months probationary period.

 Shifts: Days 7:00am-3:00pm / Afternoons 3:00pm-11:00pm / Nights 11:00pm-7:00am.


Job Features

Job Level

Entry Level

Job Category

Manufacturing

Job Industry

Plastic Rotomolding

Job ID

1234

Trim all products as per customer specifications and prepare product for shipping. All work is done at production machines. Reports to Supervisor/Lead Hand/Plant Manager. WHMIS training an asset. Chec...

Machine Operator
CANADA - Grassie, ON
Posted 1 year ago

Operate Roto Mold machine that will produce quality products as per customer specifications. Reports to Supervisor.

  • Weigh pails of powder as per product specifications ie weight, color
  • Ensure all supplies are available at machine prior to shift i.e. vent tubes etc
  • Prepare molds - clean vent tubes, parting lines and replace breather material prior to the start of every cycle
  • Check product quality for any defects and report quality issues to Lead Hand and/or Supervisor
  • Read and understand procedures to produce products
  • Use crane to open mold to extract product when cycle is complete
  • Respond to trimmer findings and troubleshoot quality issues
  • Meet machine cycle time targets and keep machine operating efficiently in cycle
  • Handle molds with necessary care to ensure longevity of tools
  • Keep clamps adjusted to ensure mold closes properly with no leaks
  • Assist with mold changes as required
  • Record number of products completed per shift on Daily Productivity Sheets
  • Maintain a clean work station
  • Ensure wearing PPE at all times
  • Perform other duties a required.
Knowledge and Experience:
  • Experience using hand tools, air tools and electrical tools
  • Familiar with a manufacturing setting
  • Mechanical knowledge is an asset
  • Quality control techniques is an asset
Skills and Abilities:
  • Perform repetitive movements
  • Stand, bend, for long periods of time
  • Lift between 15 – 60 lbs.
  • Ability to work independently or as part of a team
  • Self motivated
  • Problem solve
  • Punctual
Work Environment:
  • Plant setting
  • Fast pace

Hourly Rate: TBD •  Health, Dental, Vision upon completion of 3 months probationary period.

 Shifts: Days 7:00am-3:00pm / Afternoons 3:00pm-11:00pm / Nights 11:00pm-7:00am.


Job Features

Job Level

Entry Level

1234

1234

Job Industry

Plastic Rotomolding

Job Category

Manufacturing

Operate Roto Mold machine that will produce quality products as per customer specifications. Reports to Supervisor. Weigh pails of powder as per product specifications ie weight, color Ensure all supp...